Knowledge base
Preguntas y respuestas
37 questions from 6 articles.
Business Continuity Management and ISO 22301: BIA, BCP, Testing
What is ISO 22301?
ISO 22301:2019 is the international standard that specifies requirements for a business continuity management system. It applies to any organisation and can be certified by accredited certification bodies. It was amended in 2024 to address climate change.
What changed in the 2024 amendment to ISO 22301?
ISO 22301:2019/Amd 1:2024, published in February 2024, adds climate change to the context clauses. Organisations must determine whether climate change is a relevant issue for their BCMS and note that interested parties may have climate-related requirements.
What is the difference between a BIA and a risk assessment?
A business impact analysis looks at the consequences of disruption over time to set priorities and recovery objectives, regardless of cause. A risk assessment looks at the causes and likelihood of disruption. ISO 22301 requires both, and their results together drive continuity strategies.
How often should a business continuity plan be tested?
ISO 22301 requires a programme of exercises and tests at planned intervals and when significant changes occur, rather than a fixed frequency. Many organisations exercise critical plans at least annually, and sector regulators may set their own minimum.
Who can certify an organisation to ISO 22301?
Certification is issued by a certification body that audits against ISO 22301. Its credibility depends on accreditation of that body against ISO/IEC 17021-1 by an accreditation body that is a signatory to the international recognition arrangement now run by Global ACI. ISO itself does not certify.
Is ISO 22301 being revised?
Yes. A revision registered as ISO/CD 22301 went to committee draft ballot in 2026. ISO 22301:2019 with its 2024 amendment remains the current, certifiable edition until a new edition is published.
Read the article: Business Continuity Management and ISO 22301: BIA, BCP, Testing
Climate Disclosure Standards: ISSB IFRS S2, ESRS and GHG Protocol
What are the main climate disclosure standards?
The global baseline is the ISSB's IFRS S1 and IFRS S2, issued in June 2023. The EU requires the European Sustainability Reporting Standards (ESRS) under the CSRD. Greenhouse gas figures in both are generally measured with the GHG Protocol.
How many jurisdictions have adopted the ISSB standards?
In June 2025 the IFRS Foundation said 36 jurisdictions had adopted or otherwise used the ISSB Standards or were finalising steps to do so. By 24 September 2026 its directory listed 23 published jurisdictional profiles and 13 snapshots of approaches still being developed.
What did the EU Omnibus change for CSRD reporting?
The Omnibus I Directive, which entered into force on 18 March 2026, limits CSRD reporting to EU companies or groups with more than 1,000 employees and more than EUR 450 million net turnover, with a separate test for non-EU groups. Member States must transpose the CSRD changes by 19 March 2027.
When do the simplified ESRS apply?
The Commission adopted the revised ESRS on 3 July 2026. They apply to financial years beginning on or after 1 January 2027, after the Parliament and Council scrutiny period; for 2026, companies can choose the earlier ESRS as amended, the new ESRS or a permitted combination.
Is the GHG Protocol changing?
Yes. In July 2026 GHG Protocol and ISO announced they will consolidate their corporate standards into a single co-branded standard combining the GHG Protocol scope standards with ISO 14064-1, with an integrated public consultation planned for the second quarter of 2027.
Do climate disclosures need to be assured?
It depends on the jurisdiction. Many regimes require limited assurance first. The IAASB's ISSA 5000 applies to sustainability assurance engagements for periods beginning on or after 15 December 2026, and ISO 14065 sets requirements for bodies that verify environmental information.
What happened to the TCFD?
The Task Force on Climate-related Financial Disclosures completed its work and disbanded in October 2023 after the ISSB standards were issued. The IFRS Foundation took over monitoring of company climate-related disclosures, and IFRS S2 incorporates the TCFD recommendations.
Read the article: Climate Disclosure Standards: ISSB IFRS S2, ESRS and GHG Protocol
Conformity Assessment: Certification vs Accreditation vs Verification
What is the difference between certification and accreditation?
Certification attests that a product, process, management system or person meets requirements. Accreditation attests that the certification body, laboratory or inspection body itself is competent and impartial. Accreditation bodies accredit; certification bodies certify; neither does the other's job.
What is the difference between validation and verification?
Under ISO/IEC 17029, validation confirms that a claim about an intended future use or outcome is plausible, while verification confirms that a claim about something that has already happened is true. A projected emissions reduction is validated; a reported emissions inventory is verified.
Which standard applies to product certification bodies?
ISO/IEC 17065:2012 sets requirements for bodies certifying products, processes and services. Bodies certifying management systems such as ISO 9001 or ISO 22301 operate under ISO/IEC 17021-1:2015, and bodies certifying persons under ISO/IEC 17024.
What happened to IAF and ILAC?
The International Accreditation Forum and the International Laboratory Accreditation Cooperation were succeeded by Global Accreditation Cooperation Incorporated (Global ACI), fully operational from 1 January 2026. Existing accreditations remain recognised, and the IAF MLA and ILAC MRA marks can be used until the Global ACI mark is legally available.
Does ISO certify organisations?
No. ISO develops standards, including the conformity assessment standards, but does not perform certification. Certificates are issued by independent certification bodies, ideally accredited by an accreditation body that is a signatory to the international recognition arrangement.
How do I check whether a certificate is credible?
Check the scope and validity dates on the certificate, confirm that the issuing body is accredited for that standard and scope by a recognised accreditation body, and look the certificate up in the accreditation body's or certification body's register.
Read the article: Conformity Assessment: Certification vs Accreditation vs Verification
Data Interoperability Standards for Risk: FAIR, OGC, ISO 19115
What are data interoperability standards?
They are agreed formats, vocabularies, metadata schemas and interfaces that let different systems exchange and use data without manual conversion. For risk data, typical examples are OGC APIs for geospatial access, ISO 19115 for metadata, W3C DCAT for catalogues and CAP for warnings.
What are the FAIR principles?
FAIR stands for Findable, Accessible, Interoperable and Reusable. Published by Wilkinson and colleagues in Scientific Data in 2016, the principles stress machine-actionability, so that software, not only people, can find and use data.
What is the difference between ISO 19115 and DCAT?
ISO 19115-1 is a detailed metadata standard for geographic information, including spatial extent, quality and lineage. DCAT is a lighter W3C vocabulary for describing datasets in web catalogues. Many portals keep ISO 19115 records and publish DCAT views for discovery.
Why does interoperability matter for early warning?
Early warning chains combine observations, forecasts, exposure data and alert dissemination run by different institutions. Without shared formats and identifiers, data arrive late or are re-keyed by hand. CAP, for example, lets one warning be distributed across many channels.
What data does the Sendai Framework Monitor collect?
Countries report against 38 indicators for the seven global targets of the Sendai Framework, covering disaster mortality, affected people, economic losses, infrastructure damage, strategies, cooperation and early warning. By October 2025, 176 countries had reported through it.
Is schema.org enough to make a dataset interoperable?
No. Schema.org Dataset markup improves web discovery, but it does not describe quality, lineage or spatial reference in the depth that risk analysis needs. It works best as a discovery layer on top of a richer metadata record.
Read the article: Data Interoperability Standards for Risk: FAIR, OGC, ISO 19115
Digital Public Infrastructure (DPI): Definition, Safeguards and Risks
What is digital public infrastructure?
Digital public infrastructure is a set of shared digital systems, typically digital identity, payments and data exchange, that public and private actors build on and use to deliver services at societal scale. The G20 described it in 2023 as an evolving concept that can be built on open standards and open-source software.
What are the three main components of DPI?
The components most often cited are digital identity, digital payments and data exchange or consent systems. Registries, credentials and messaging are frequently added. The G20 and the Global Digital Compact deliberately avoid a fixed list and recognise multiple models of DPI.
What are DPI safeguards?
DPI safeguards are measures that prevent harm from DPI, such as exclusion, discrimination, surveillance and data breaches. The Universal DPI Safeguards Framework, stewarded by the UN Secretary-General's Envoy on Technology and UNDP and released in 2024, sets out 18 principles.
What is the difference between DPI and digital public goods?
Digital public goods are open assets such as open-source software, open standards and open data. DPI is the shared system in operation at national or societal scale. A country can build DPI with digital public goods, with proprietary components, or with a mix.
What is the 50-in-5 campaign?
50-in-5 is a campaign launched on 8 November 2023 to help 50 countries design, launch and scale at least one component of their DPI safely, inclusively and interoperably within five years. In October 2026 its website reported 42 participating countries.
What risks does DPI create?
Because DPI is shared and used at scale, its failures are systemic: an outage, breach or exclusion error affects whole populations and the services built on top. Key risks are exclusion, privacy and surveillance, cyber attack, concentration on single suppliers, and weak redress.
Read the article: Digital Public Infrastructure (DPI): Definition, Safeguards and Risks
ISO 31000 Risk Management: Principles, Framework, Process and Family
Is ISO 31000 certifiable?
No. ISO 31000:2018 is a guidelines standard, so it contains recommendations rather than auditable requirements, and accredited certification against it is not offered. Organisations use it as a benchmark, often alongside certifiable management system standards such as ISO 22301 or ISO/IEC 27001.
What are the three parts of ISO 31000?
ISO 31000:2018 is built on principles, a framework and a process. The principles state the purpose and character of good risk management, the framework embeds it in governance, and the process covers communication, scope and context, assessment, treatment, monitoring and reporting.
What are the eight principles of ISO 31000?
The 2018 edition lists risk management as integrated, structured and comprehensive, customised, inclusive and dynamic, based on the best available information, taking account of human and cultural factors, and continually improved. All eight serve the purpose of creating and protecting value.
Is ISO 31000 being revised?
Yes. ISO/TC 262 is preparing a third edition. In late October 2026 the ISO catalogue showed the committee draft (ISO/CD 31000) approved for registration as a Draft International Standard. The 2018 edition remains current until the new one is published.
What is the difference between ISO 31000 and IEC 31010?
ISO 31000 sets out the principles, framework and process for managing risk, while IEC 31010:2019 explains how to select and apply risk assessment techniques such as bow-tie analysis, scenario analysis or Monte Carlo simulation. IEC 31010 supports the assessment step of the ISO 31000 process.
How does ISO 31000 compare with COSO ERM?
Both are widely used enterprise risk frameworks. ISO 31000 is a short, generic international guideline for any organisation, while COSO's 2017 framework, Enterprise Risk Management: Integrating with Strategy and Performance, is organised around five components and 20 principles and is closely tied to corporate governance and audit practice.
Read the article: ISO 31000 Risk Management: Principles, Framework, Process and Family